How to Turn on a Laptop With a Broken Power Button

Last Updated/Fact Checked on August 26, 2021 by

If your laptop power button is fully damaged, you may want to understand How to Turn on a Laptop With a Broken Power Button? These recommendations are sure to make the start of your laptop as seamless as possible, even if you cannot work on the damage temporarily or permanently.

Many of you who teach How to Turn on a Laptop With a Broken Power Button? will recommend processes requiring the laptop chassis to open completely. In contrast, we advocate for you to do it without opening the lid and turning a laptop on with keyboards.

We found that the plastic power button designs to press another button on some laptops when we encourage it. Therefore you want to see whether removing the plastic power button from the surface leaves a push-button below. If so, you could wish to push a button on something like a screwdriver rather than manipulating the motherboard, especially if you are not a tech-savvy user.

Power Button

The power button for a laptop or netbook computer places on the keyboard’s left, center, or right side. If you cannot find the power button above the keyboard, look at the right hinge on the screen.

The power button has a cable connecting to two motherboard pins. A circuit is closed on the mainboard by pressing the power button. The power supply receives the signal to power the computer, and so it starts.

How to Turn on a Laptop With a Broken Power Button?

Turning on With Motherboard

How to Turn on a Laptop With a Broken Power Button

This method will indeed work on every laptop; even if the power button destroys, this method will still enable you to switch on your computer.

So how can we achieve that? Let’s go step by step.

  • Unplug your laptop’s charging cord.
  • Open the laptop case and find the position of the power button.
  • Remove the button. 
  • Under the button, there will be 3 to 6 pins.
  • Use wire pins or any driver like a screwdriver to connect.
  • When you connect the pins to the driver, the laptop will switch on.
  • And this is it. And you are done.

If the laptop battery is dead and you want to connect your laptop to the adaptor with AC(Alternate Current), use this approach with caution, and I propose using a screwdriver that connects the pins to the computer.

Turning on From Keyboard 

You can turn on pressing a key on the keyboard. It won’t switch on by default, but if your computer supports it, you can switch it on your Basic input/output system. 

  • Switch your notebook off, and then boot it back up and enter the Basic input / output system.
  • Every Basic input / output system structures differently, so you’ll have to do few digging surround the menus. You’re searching for a ‘Switch On By Keyboard’ design of setting lock within a ‘Power Management portion.
  • If you feel trouble to search few things as it, You’re probably out of luck as this feature is not supported by your laptop.
  • It’s best to check your machine online, however, because the feature can be easily found or added to a Basic input / output system reload.
  • You will want to enable your ‘Power On By Keyboard’ option once located. Some laptops allow you to choose any key that you prefer to use to power your computer, while some may provide you with several selected keys.
  • Ensure You know what key to turn your laptop on.

When completed, save your settings, and exit the Basic input/output system. Please turn off your laptop, and test your new feature by turning it on with your newly selected power-on key.

Turning on With Wall Socket and Extension

If you’re using a Dell, HP, ASUS, Lenovo, Acer, or even Toshiba laptop, this is one option that you might want to try. It’s a pretty cool solution for users who don’t want to short-circuit their laptops to turn it on.

  • Search the cable that links the power button to the motherboard.
  • Disconnect and leave this cable unplugged.
  • Deattach the battery from the laptop and plug the computer into the socket.
  • It should power it ON.
  • If the laptop is powered ON, return the battery to the computer, disconnect from the socket, if you choose to, and you should be fine.

On some laptops, you might have to enter your BIOS to set the computer to turn on when it detects AC.

Turning on With Clock Battery Method

If the power button doesn’t work, and you have to finish urgently, you can use a clock battery to power your laptop.

You must follow the procedure below for this method to start your laptop.

  • Disconnect from the motherboard the battery cable (not the charging cable).
  • Disconnect the motherboard clock battery.

That way, your laptop won’t have any power, and any power source will boot it. Then re-connect the battery, and the battery will not remember when the computer connects to the charger. It is power on.

Activate Wake on-LAN on Laptops

Like waking a laptop on a keyboard, the LAN option requires prior BIOS activation.

  • Enter BIOS settings while starting with F2.
  • When you boot your PC, the advanced menu option displays by pressing either the “F2” key or a “DEL” key.
  • Enter BIOS settings when starting with F2.

Instead of again shutting down to access the BIOS Setting, please utilize the methods below:

  • Go to “Settings” under the “Start” menu choice.
  • Select the “Update & Security” option
  • Read the options on the left and select “Recovery.”
  • You’ll notice a two-section tab open.
  • Under “Advanced Setup”, select “Restart Now.”
  • A new window create.
  • Choose “Disorder”
  • Choose the “Advanced Options”
  • Go to “Power Administration” or “ACPI Management” and click on “Enter.”
  • Check for a setting for “Power On LAN” or “Wake On LAN.”
  • To allow the option, use the “+” or “-” minus key.
  • Choose a favourite key to power the laptop.
  • Use the F10 key to save and quit.

After the preceding steps take, the next thing is to set up the network card to ensure that the system powers it.

Network Card Configuration

How to Turn on a Laptop With a Broken Power Button
  • Right-click the button “Start.”
  • Select the option “Device Manager.”
  • Wait until you access the “Device Manager” menu.
  • See “Network Adapters”
  • Click on the menu right.
  • Click on the option “Properties.”
  • Go to “Power Administration”
  • Type the box “Allow this computer to wake up”

Testing if Lan Works Wake-up

  • Shut down the windows
  • Once it’s off, plug in the LAN to recharge it.
  • Wake-on LAN settings and network configuration depend on your motherboard configuration.

FAQs – How to Turn on a Laptop With a Broken Power Button

  1. How Can I Turn on My Laptop Using the Keyboard?


    Many computers may enable simply by hitting a key on the keyboard. It won't activate by default, but you can switch it on the BIOS if your laptop supports it. Turn off your computer, then back up and enter the BIOS.

  2. When I press the Power Button on My Computer, Nothing Happens?


    If you still receive nothing whenever you click the power button, search for an idle indication light on your motherboard to confirm that the motherboard gets electricity. If not, you may need a new power source. Make sure the motherboard is running and connected well.

  3. What if Your Laptop Doesn't Turn on?


    If your laptop does not power up, you may be responsible for faulty power, failing hardware, or a broken screen. In many circumstances, you may remedy the problem yourself by ordering or altering the setup of your laptop.

Conclusion

You may want to understand How to Turn on a Laptop With a Broken Power Button? These recommendations are sure to make the start of your laptop as seamless as possible, even if you cannot work on the damage temporarily or permanently.

Suppose you can’t turn on your laptop after so many attempts. Try the solutions referred to in the article. However, if none of them worked, problems could occur in other components of the computer or notebook. In this case, you are looking for professional technicians, and in no time, you will fix the problem.