Today's Top Amazon Deals - Up to 70% OFF -

How to Turn on a Gateway Laptop Without the Power Button?

Last updated on May 11th, 2021 at 05:14 pm

Laptops such as the majority of goods deteriorate after a period of use; therefore don’t be surprised if a component such as the power button stops working. It is difficult to know How to Turn on a Gateway Laptop Without the Power Button, but here in this guide, I will cover tips on how to work around this.

You may use an external keyboard for Windows or allow wake-on-LAN for Windows to switch on/off a laptop with no power button. For Mac, you can reach clamshell mode and wake it up with an external keyboard.

Turning On Laptop Without A Power Button [Step By Step]

Before we go to the solution of the issue, let me clarify this to you, there might be some other explanations why your laptop does not turn on after several taps.

If the laptop does not yet turn on after using the method below, you must search for other laptop hardware to see if they are defective.

These methods are completely safe if you follow them step by step on your laptop and do not damage the hardware of the device.


How to Turn On Laptop without Power Button [From the Motherboard]

This method certainly works on any laptop; even if the power button is completely broken, this method will still allow you to enable your laptop.

So how to do it lets you step by step.

1) Unplug your laptop’s charging cable

2) Open the laptop case and find the location of the power button

3) Take the button off.

4) Under the button there will be 3 to 6 pins.

5) Connect wire pins, or any driver like a screwdriver can be used.

6) When you attach the pins to the driver, the laptop is activated.

7) And you’re done.

Note: If your laptop battery is dead and you want to connect your laptop with the adapter’s AC(Alternate Current), use this method cautiously, and I would suggest connecting your laptop pins with a screwdriver.

You can also watch the video to understand better:


Switch on a Windows Laptop with an external keyboard without a power button

Using a keyboard to power a laptop is an environment for most laptops. However, this is still disabled by default. Until the power button develops defects, the consumer or owner should have taken preventive steps to ensure the use of this tool.

Enabling the use of an external laptop keyboard

To allow the use of an external keyboard on the laptop, the BIOS settings must first be accessed. The following measures are explained:

Step 1a: Enter BIOS settings when starting with F2.

You can see the option to access the advanced menu by pressing either the “F2” key or “DEL” key when your computer is booted.

Or

Step 1b: Enter BIOS settings with F2 while starting.

You may use the following moves, rather than shutting down again to access the BIOS settings:

Step 1b.1: Go to “Settings” in the “Start” menu option

Step 1b.2: Select the “Update & Security” option

Step 1b.3: Read the options on your left and choose “Recovery

Step 1b.4: You’ll see a two-section tab open.

Step 1b.5: Under “Advanced Setup” Select “Restart Now

Step 1b.6: A new window is being created

Step 1b.7: Choose “Troubleshoot

Step 1b.8: Choose the ‘advanced options

Step 2: Go to the tab ‘Power Management’ or ‘ACPI Management‘ and click ‘Enter

Step 3: Check the “Keyboard Power” setting or “Keyboard Wake” or something like that.

Step 4: Use the key “+” or “-” to activate the option.

Step 5: Choose a preferred key for laptop power

Step 6: Save and exit with the key F10.

The next thing that needs to be done after the above steps is to verify that the settings function.

Checking if the keyboard works

Step 1: Shut the windows system down

Step 2: When it is off, press the key you have selected to restart it.


How to Turn On Laptop without Power Button [With Wall Socket or Extension]

If you use a brand laptop like HP, Dell, Toshiba, ASUS, Acer, or Lenovo, you can easily use this feature and act as a charm.

This option is also available for those people who don’t want to shorten their laptop to turn it on without a power button.

Step by step Guide

  • Find the cable that links the motherboard power button
  • Disconnect and unplug the cable
  • Enter the battery
  • Connect the laptop to the socket to power it
  • If you want the power socket to be disconnected, put the battery on the laptop.
  • Note: You may need to enter your BIOS on a laptop to activate your laptop when connected to AC. 

Enabling Wake-On LAN For Windows 10

Like waking a laptop via a keyboard, the LAN option requires BIOS to be enabled in advance.

How to allow Wake-On LAN with BIOS

Step 1a: Enter BIOS settings when starting with F2.

You can see the option to access the advanced menu by pressing either the “F2” key or “DEL” key when your computer is booted.

Or

Step 1b: Enter BIOS settings with F2 while starting.

You may use the following moves, rather than shutting down again to access the BIOS settings:

Step 1b.1: Go to “Settings” in the “Start” menu option

Step 1b.2: Select the “Update & Security” option

Step 1b.3: Read the options on your left and choose “Recovery

Step 1b.4: You’ll see a two-section tab open.

Step 1b.5: Under “Advanced Setup” Select “Restart Now

Step 1b.6: A new window is being created

Step 1b.7: Choose “Troubleshoot

Step 1b.8: Choose the ‘advanced options’

Step 2: Go to the tab ‘Power Management’ or ‘ACPI Management’ and click ‘Enter’

Step 3: Check for a setting of “Power On LAN” or “Wake On LAN

Step 4: To allow the choice, use the “+” or “-” minus key

Step 4: Choose a preferred key to power the laptop

Step 5: Save and exit with the key F10.

The next thing to do after taking the above steps is to configure the network card so that it can control the device.

Network Card Configuration 

Step 1: right-click “Start

Step 2: Choose the option “Device Manager

Step 3: Wait for opening “System Manager

Step 4: Look for “Capabilities Network

Step 5: Click on the menu right

Step 6: Click the option “Properties

Step 7: Go to the “Power Management” tab

Step 8: Tick the “Allow the machine to wake up to this unit” box

Testing If LAN Works Wake-On

Step 1: Shut the windows system down

Step 2: Tap into the LAN to turn it back on once it is off.

It is important to remember that the wake-on LAN configuration and network configuration depends on your motherboard configuration.


How to Turn on a Gateway Laptop Without the Power Button Using Clock battery Method

The clock battery on your laptop can be used to power your laptop if the power button does not work and you need to finish the work as a matter of urgency.

This method requires you to follow the step below to start your laptop.

  • Disconnect the battery cable from the motherboard (not charging cable).
  • Switch off the motherboard clock battery

This means your laptop has no power left and every power source boots it. Then connect the battery and note that the battery cant matters when you connect the laptop with its charger.


How to Turn On Laptop without Power Button [With Lid]

Suppose you want your laptop to switch to Lid without the power button. Then this option allows you to turn your laptop on and off via Lid.

The laptop sleeps while the deck is closed, however, you can change it to turn it off and on.

Step by Step Guide

  • Go to the BIOS settings with F2 or Del key after your laptop has been started
  • Go to power control under the advance tab
  • Search for the option “power on open deck” in power management
  • Adjust the configuration to turn the laptop on/off with an open lid.

How does a Power Button Laptop work?

You need to ensure that a battery is available or the device is connected to a power supply to power the laptop. The power from each of these two sources generates electricity that circulates in the laptop’s circuits.

However, the power button stops a certain point of electricity.

However, the electricity outlet opens when the power button is pressed so that electricity can flow to the other laptop. The laptop goes back to sleep when the same button is pressed.


Can I Install A New Power Button?

Yes, when you find the previous one has formed a fault, you can install a new power button on your laptop. Follow these steps if you want to do the installation yourself:

Step 1: Removal of battery, AC adapter, and back panel

Step 2: Remove RAM and hard drive

Step 3: Remove the bezel of the keyboard

Step 4: Remove the keypads

Step 5: Remove the top frame and search for the power changer

Step 6: Remove the old button and insert the new button

Step 7: Reassemble the laptop


FAQs ― How to Turn on a Gateway Laptop Without the Power Button?

How do I turn on my computer if the power button doesnt work?

One thing you can do is to unplug the power supply entirely, press and hold down your power button for 15-30 seconds, then plug in the power supply to see if it turns on.

Why will my PC not turn on?

If your machine doesn’t switch on — no fans are going, no flashing lights, and nothing on your screen — you’re likely to have a power problem. Unplug and plug your device in to a wall socket you know works, rather than a power strip or battery backup that could malfunction.

How do I know if my power button is broken?

Start by unplugging your motherboard’s power switch. Take a flat head screwdriver and touch it on the two pins for 1-2 seconds the power switch has been attached. If the device comes on, the power button is defective, otherwise, you may want to try your power supply with the paper clip test.


Conclusion

If your laptop is turned on or off after many attempts with the power button, it might be time to take other alternatives into account. Try the above methods to fix your problem. However, if none of them works out, the issue might go beyond the power button.

Your machine may well have other hardware issues, like the ability to store power or failure in the CPU. You can have to look for specialist technicians to diagnose the problem in such a case.

1 thought on “How to Turn on a Gateway Laptop Without the Power Button?”

Leave a Comment

7 + 3 =