Last updated on May 9th, 2021 at 01:18 pm
My USB ports don’t seem to be working. Here’s a solution to the problem, which will take care of it soon. Is your PC or laptop (or USB port) not working correctly? The only way to address this is to determine the source of the problem.
So I hope that the reason you come here is that you are looking for How to Replace USB Port on Laptop? The solution is all in one place: this info can quickly and easily get your USB ports back in operation.
Table of Contents
Think Your USB Port Is Not Working? Test It!
We are proceeding before making any adjustments. See if the port is at fault rather than assuming the hardware has one.
To find out which is the problem, you must be familiar with USB. It means, as a side effect, checking the USB port.
If it doesn’t attach automatically, connect the USB to another USB port. If the solution works, it’s the first port; if the problem isn’t found, it’s broken. If the drive cannot be reformatted, it will need to be replaced.
Your USB port could break, or your laptop will come to a grinding halt.
- Your device is not found.
- you have recently installed and don’t know how to remove. which means you recently installed the software and didn’t know how to remove it (removing and replacing the device might solve this)
Regardless of the solution, you can research the status of the USB port. Does it need to be repaired? You should shut down your PC or laptop and turn it off to find out exactly where your files are located.
Finally, take a look at the USB port. Does it look neat and clean? Roughly stated, there is a possibility that the port has accumulated dirt, dust, and debris. Laptop sided and desktops can also experience it.
The lack of airflow reduces the system’s cooling performance. Some laptops will shut down or suffer performance degradation from the heat in an instant. This issue can be remedied by vacuuming out the USB port. In addition, a vacuum cleaner would be helpful.
How to Replace USB Port on Laptop [ Simple Steps To Fix ]
The problem could be with your system or the USB ports in your machine. Here are some steps you can take to diagnose the problem on your own.
You may test whether the issue was solved by doing a Windows update, or you will have to update your drivers.
Step 1: Select “Start,” then click “All Programs” and select “Windows Update” to begin the process. Often a Windows update will address issues with the drivers and update your USB port.
Step 2: If the USB interface is the issue, plug it into a different USB port on the laptop or another machine. The first thing to do is to check if the system has a “Write Only” tab. If the switch is still doesn’t light up, push the tab into the unlocked spot.
Step 3: The device can be used on several computers. If the device operates on another machine, select “Start” and select “My Computer.” plug the device in and see if it appears in the available drives list.
If the drive is not seen, click on “Map Network Drive.” Select a drive letter from the drop-down list and select the corresponding USB device in the new position region. Reconnect and try again.
Step 4: You can do it in two ways: either by opening “Start” and navigating to “Control Panel” and clicking on “Hardware and Sound” and then choose “Device Manager,” or open “Start” and select “Control Panel>Hardware and Sound>Device Manager.”
Move down the list and press the ‘z’ to the left of “Desktops” Double-click the name of the new USB port in the drop-down menu to access the device.
Go to the “Settings” and choose the “Update Drivers” option. Reattempt the port when the driver is out, and try again.
Step 5: When you’re done using the program, you can close the [Drivers] tab and right-click on the USB port to save your settings.
Go to “Options.” Delete the “Allow the machine to shut down to conserve energy” from the box in the “Power Options” tab, and the problem will be resolved.
Click on the “Resources” and look in the lower part of the “Communications” section. Double-click the “Enable Computer” and click “OK to accept. Let’s give it another shot.
Step 6: Close the tab and then right-click the name of the USB port to access the Device Settings flyout menu. Uninstall the application.
Plug a USB device into the USB port and restart the computer. You will be asked for the serial number of the newly found port when you click on the button that looks like a floppy disc in the window that opens.
Step 7: The first manufacturer’s name will be displayed when the machine boots. Use the “F1” key to restart the computer, and keep pressing until the manufacturer’s name appears on the screen.
Next to a scroll through the list, highlight the item called “Advanced.” Now type in “USB Support” and press “Enter.” Then scroll down and press “USB Support.” Load operating system settings and press “F10” to save them.
Step 8: If your computer is running Windows XP, go to ‘Tools’ and choose ‘Internet Options. Download the Windows XP USB driver (see Resources). Restart the device to see if it is connected via a USB port.
Can Restarting a Computer Fix Broken USB Ports?
Are you sure that you want to turn it off and then on again?
This piece of equipment has withstood the test of time since it is well known to have worked for many years.
Make sure you plug your unrecognized USB card into the suspect USB port. Once the machine has come back online, the USB unit should be found. In the absence of that, take a look at the list of devices in the Windows System Manager.
How to Check USB Ports in Windows 10 Device Manager
- Before we can use Device Manager, we must first pick it by right-clicking on the Start menu and clicking Device Manager.
- It groups the devices and lists them in the Device Manager, respectively. You should be able to locate USB controllers, which are grouped by their function, towards the end of the list.
- Search the registry for the “USB Host Controller” and use that to find other connected USB devices. Keep looking before you find something whose full name consists of those three words.
- Unable to detect the USB controller? The result of this could be that your USB device will not work. On the scanner window, select the “Scan for hardware changes” option. Most of the time, this will scan all the USB ports and warn the system of an attached device’s existence.
- When that doesn’t work, consider reinstalling the USB controllers. Select the USB Controller, then press the ‘Uninstall’ on each one in turn to remove them. Let the program install, then sit back and wait for it to restart.
- USB Controllers will be reloaded automatically when Windows restarts. Using this “refresh” helps to restore functionality to the USB port.
- If you use a USB mouse and keyboard, the USB Controllers will be unavailable when the host is being installed.
Have Power Settings Stopped Your USB Ports Working?
It will affect the identification of USB devices if you use power management features on your USB controller. If the USB appears to be turned off, the machine is putting the device to sleep in the Device Manager.
If you think your USB port is broken, this is especially true. However, you are interested in saving energy, so your Windows 10 desktop could be in battery-saving mode.
The USB selective suspend feature cuts off the USB system to save battery life.
When it’s running, the function seems to have issues with USB ports.
Tweak these settings by accessing the Windows Control Panel.
- Go to your Start screen and select Settings. Then select Control Panel.
- Pick out the appropriate answer from the choices.
- Click on Hardware and Sound and select the Power Options link in the left pane.
- When you find the highlighted plan, click on it to pick it. Make a change to your plans. Lower your system power options
- Searching for ‘USB Settings & expand to find USB selecting suspend setting
- Change the drop-down menu to Disabled
- Apply and accept
- Finally, power down and restart your PC to ensure this change takes effect.
- Go ahead and plug in your new devices, the ones that were not able to be before being able to now.
(While Control Panel is out of the picture, it is helpful for tasks like power management, at least.)
You’ve Fixed Your Broken USB Port!
Typically, when a USB port on a system is not working, you have several possible solutions to resolve the issue. In the majority of instances, you will be able to get it fixed. If your USB port is not working, you should know that this:
- Make a physical check
- Completely fix or replace a port on the PC to restore its ability to send or receive data.
- Restart Windows
- UNINSTALL the USB Host Controller
- Disable the USB Selective Suspend power saving option from the USB host controller.
Other places on your system are equally vulnerable to malware, like USB ports. Hardware maintenance can minimize possible problems, which will result in significant cost savings if you can determine what needs to be repaired and before that happens.
FAQs ― How to Replace USB Port on Laptop?
Is it possible to replace USB ports on a laptop?
How much does it cost to replace a USB port on a laptop?
For two hours of work, it will cost you another $10. The job of desoldering the port requires that the machine’s motherboard be removed, so it is moderately complex. It’s safe to say that $100–150 is the mainstream price range.
Can a USB port go bad?
If a laptop is connected to a USB port, it will be recognized. If the port isn’t open, there might be a problem with it. Some USB ports fail or may be disabled by impact.