If the port of your laptop charger is not working, this guide will show you how to replace charging port on Asus laptop. Make sure you do this tutorial before taking any drastic steps, such as purchasing a new charge or replacing the charging device, and see if you can fix the issue.
This guide will help you narrow down the dilemma and the most cost-effective approach.
How to Replace Charging Port on Asus Laptop
There may be several reasons why your laptop cannot charge, such as a loose connector or deformed charge port.
You will have to disassemble the laptop after determining where the laptop charging problem comes from, i.e., the charger port.
A more thorough look will allow you to find the particular parts to replace. However, if you feel out of your depth with this repair, we highly suggest that you ask for more technical and clinical assistance.
If you want to repair a charging port, you first have to identify the main problem. If the power jack is connected to the motherboard, it can be removed and replaced easily.
On the other side, you would have to solder the power jack into the motherboard and replace it with a decent one. If you can’t find a working jack, you can also substitute the power link configuration with a pigtail.
There may be serious damage to the plug, requiring a spring and a screwdriver to reset the port connectors. You may also use tweezers to reset them.
How to identify the issue
First of all, you need to diagnose where the defective charge port causes the charging issue. A faulty battery, spoilt power adapter, or cut cables are the key culprits for a not-charged laptop.
First, check if the charger outputs the right voltage with a multimeter. But if the charger works, the issue lies in the battery of the laptop. If you do, you will probably have to change the battery entirely.
If the power adapter does not have the correct voltage, then the first option mentioned below will allow you to repair it. If there is no power coming out of the adapter, then the cabling can be defective. In the second alternative, we go deeper into bad cabling and fast and affordable solutions.
How to Deal With a Faulty Adapter
The adapter attaches electricity to the power supply through a plug and converts AC power to DC. You can also treat this electrical device very carefully.
If you cannot take appropriate safety action, you get or approach an electrician to fix a new battery, usually available in your local laptop repair store.
You can repair the adapter by yourself with suitable precautions and a rudimentary understanding of how the electric circuits operate. Please switch off the charger from the main electrical outlet first and uninstall it.
The plastic case is coated with a super adhesive, and most laptop power adapters are housed. Suppose yours looks like this, but it firmly on a hard surface and opens the two plastics.
Between the two plastic pieces, you can run a sharp cloth or screwdriver to break the seal. Then take the charger off carefully to expose the internal components.
You can see the motherboard with transistors and condensers on the inside. A famous saying about failed adapters is swollen or popped condensers. You can fix this little problem by having a different (cheap) condenser and replacing the defective one.
Check the cable continuity with a voltmeter to make sure that the cables do not break. When connecting to the AC power adapter, be extremely careful not to contact the board. If the DC cable outlet has a problem, it can be replaced entirely at this point.
Be careful not to exchange positive and negative DC outlets because the battery on the laptop would not charge in such a situation.
How to Deal with Broken Cables
Finally, the cable on the charger of your laptop will break up. If that happens, you don’t have to buy a new one necessarily. Some laptop adapters have glowing LED indicators to demonstrate that they are powered.
If you have such a mechanism on your adapter and light up when the power is connected to the power supply, then the problem is possibly the DC output cable.
Some fast solutions for broken cables are as follows:
- If the adapter doesn’t lighten, you can first check the AC power cable for no output voltage with a voltmeter. If the AC cord does not provide the necessary power, you can quickly determine the source of the problem. The problem may be caused by anything as simple as a broken fuse, a defective plug, or a cut drill. Replace the primary AC cord for the above problem (they are cheap).
- If the AC cable is working, the problem is either the adapter or the DC outlet. A revealing indication of defective outlet cables is that the laptop charger can only be broken from the inside when you switch or put them in a specific corner.
- L-connectors like those found on most HP laptops are less susceptible to damage. Other producers, including Dell, need more cable robustness. Regardless of the sort, the length of the cable from the power adapter to the laptop finally fails. Mainly due to the use of the mobile PC.
- When the DC power cord is wiggled or placed to charge the laptop in a certain way, either the output cable is broken, or the connector is defective. Of the two, it is considerably easier to repair the DC output cable.
- After you have noted what part is bad, cut the thread and not overthink the shock if you need to shave it. The shock will only avoid RF interference from the laptop, a compromise that you can compromise.
- Then you want to carefully sheathe the plastic layer outer of the two strings, approximately one inch. You can solder, braid or use connectors to form a correct link to competitor wires for the best results. Ensure that you don’t contact the attached wires with tape to don’t circuit the link.
- If a broken pin or the cable causes the issue is too close to the connector, only the port or DC cable and not the entire adapter need to be replaced.
Can I Charge My Laptop Through a USB Port?
Short answer: No, your laptop cannot be charged via a USB port. USB ports typically supply power to various devices rather than the other way around.
However, new laptops can also be used to charge the machine, including a USB-C port. However, they are not as fast or reliable when it comes to charging as traditional ports.
How Much Does It Cost to Replace a Laptop Charger Port?
To replace your laptop charger port, you need to know how to open your model. A labor cost for a laptop technician can be drastically different in another region.
See how to disassemble your laptop model before you reach our motherboard to prevent high costs.
The power port is soldered to the frame, and you will find it loose and will not keep in touch. Look for the online port of your laptop and retrieve it onto your motherboard. The parts are inexpensive, but paying for a laptop technician service cannot be said the same.
FAQs ― How to Replace Charging Port on Asus Laptop
Can charging ports be fixed?
Does Apple fix charging ports?
How can I charge my laptop with a broken charger port?
The great thing about power banks is that they don’t need to be connected to an outlet when they charge your laptop.
Can I use a wireless charger if my charging port is broken?
Why is my laptop not charging when plugged in?
A laptop charger consists of the leading cord, adapter, and outlet of the AC system. To solve any problem, follow the same order when attempting to determine the root of the problem. I know who can save you time and money in maintenance (sometimes in hundreds of dollars).