When we didn’t have any HDMI/AV screens, we struggled for days trying to work on the Raspberry Pi. The idea here is to give individuals with laptops similar to ours to use their laptops as a monitor for the RaspberryPi.
Raspberry Pi is recognized as the “Pocket-Sized PC” for daily tasks, but it is inconvenient to carry an additional display simply for debugging and project purposes.
Further, for many of us, the HDMI display will not be available. We discovered a method for quickly How to Connect Raspberry Pi to Laptop Using HDMI. Relax and follow along with this straightforward tutorial. It is what we’ll need:
- Raspberry Pi.
- Micro USB Cable. (Optional)
- A Laptop.
- SD Card with Raspbian.
- Ethernet Cable.
If you want to install it for the first time, you will need:
- AV/HDMI Display.
- Mouse & Keyboard
How to Connect Raspberry Pi to Laptop Using HDMI
Step 1: First, you must set up your Raspberry Pi.
Exactly how does it work?
You may attach an ethernet wire to your RaspberryPi to link it to your laptop’s display. On a 100Mbps ethernet connection between the two laptops, the desktop GUI of the raspberry pi may be accessed.
You can use several software to establish a connection between your laptop and the Raspberry Pi. You will connect your Raspberry Pi to your laptop using the VNC program.
By installing the VNC server on your raspberry pi, you may view your pi’s desktop remotely as if you were sitting in front of it, using your mouse and keyboard. Furthermore, you can place your Raspberry Pi somewhere in your home, but you can still control it.
Moreover, the internet can be shared over Ethernet from the laptop’s wifi. You also can access the internet and link your Raspberry Pi to your laptop’s display with this adapter.
You’ll need an SD card with the operating system already installed before connecting your Raspberry Pi to your laptop display. SD card preparation is a popular topic, and you will find plenty of blog posts and videos about it.
For beginners, it is possible to obtain this free eBook on Raspberry Pi: The Beginner’s Guide. Learn How to Connect Raspberry Pi to Laptop Using HDMI in this article.
When you’ve completed the installation process for your SD card, please insert it into the Raspberry Pi. Next, connect your micro USB cord to the pi and then power it.
While you’re in the main computer room, connect your RaspberryPi to the laptop through an ethernet wire. To complete the set, connect the keyboard and mouse to it.
Now, connect the HDMI display to the DVI monitor (the HDMI is only required for running the pi for the first time).
Now connect your Pi to power. Continue following the instructions below to connect your Raspberry Pi to your laptop display.
Step 2: Sharing Internet Over Ethernet
Once you’ve learned how to connect your laptop to the Raspberry Pi via Ethernet connection, read this step for the next steps.
For Windows, the command is: If you want to connect more people to the internet using an Ethernet cable, head to the Network and Sharing Center. Once you’ve selected a wifi network, click the “Connect” button.
To provide other network users permission to connect to your computer, click the Properties button. To allow other network users to connect, pick the Sharing tab and click the “Allow other network users to connect” option. Use the “Local Area Connection” networking setting instead of any of the other networking connections.
Following these instructions will enable your computer to receive a dynamic IP address, and all other devices linked to your laptop will have a new IP address.
To confirm the IP address your laptop is getting, click on the Local Area Connection link that has just been created:
The following graphic illustrates the IP address assigned to my laptop, which is 192.168.137.1. To determine the IP address that has been given to the connected ethernet device, perform the following task.
When you know that the IP address for your laptop is 192.168.137.1 and the subnet mask is 255.255.255.0, think about it like this:
Start a Command Prompt window.
Check the broadcast address of your IP for a ping. To type in, for example, ping 192.168.137.255
Keep the ping running for 5 seconds after the ping is done.
Make sure the gadget has replied. femtosecond; pulsar –a
Step 3: Setting Up the VNC Server to Connect Raspberry Pi to Laptop Display
You need an HDMI display if you have one. Installing a VNC server on your Raspberry Pi requires connecting an HDMI display. Run the following commands in the LX-Terminal to install VNC:
$ sudo apt-get update
$ sudo apt-get install tightvncserver
As long as you have a display, you do not need to worry. Connecting using SSH allows you to access your Raspberry Pi using Putty.
Run the same commands on your Raspberry Pi to install VNC, too. to start VNC Server on the Pi, type “start vnc” The following command on an SSH terminal is for setting up VNC:
$ vncserver :1
To access your account, you’ll be asked to enter your password. This question will only be asked once when the first time setup is completed. The password you entered has eight digits.
Make sure you use this password to log into the Raspberry Pi from elsewhere. Creating a second “read-only” password should be declined (n).
Wow, I’m excited! You can now connect to the VNC server running on your Pi. Before we can start controlling the Pi, we need to switch to the laptop from which we will operate the Pi. After you have your VNC client set up, then set up a VNC connection to the Pi.
Step 4: Setting Up the Client-Side (Laptop)
- To instal VNC, get the VNC client here and instal it. The first time you use VNC Viewer, you will see the following:
- Use the IP address of your laptop to determine the raspberry pi’s IP address (you got the address from the earlier step). Then, include Entering a port number and pressing the connect button connecting you to that port. You will be warned and asked to continue by pressing “Continue.”
- Enter the 8-digit password that was input during the installation of the VNC server on the Raspberry Pi.
When you run your desktop through a VNC connection, it should display on your screen as a VNC window. Including using the Pi’s keyboard, mouse, and monitor, you’ll be able to access the GUI and perform everything.
The possibilities are endless because SSH works across the network. You can set up your Raspberry Pi in any location as long as it’s linked to your network.
It means that if you want to use your Raspberry Pi with anything, you should connect it to your laptop through an ethernet wire and then provide power.
Once you’ve opened VNCViewer, provide it the IP address of your Raspberry Pi. By connecting your laptop’s display to the Raspberry Pi’s monitor, you may make use of the Raspberry Pi’s monitor display.
How to connect Raspberry Pi to laptop without ethernet cable
- To write the Raspbian operating system image to your SD card, use Etcher.
- For your Windows or Mac PC to view the little FAT32 partition on the SD card, you must first remove and reinsert the SD card.
- Assign the name ssh to the file created on the FAT32 partition (or ssh.txt).
How to connect Raspberry Pi to laptop using VNC
Go to the VNC Server screen on your Raspberry Pi and open it. To access the Experimental Direct Capture Mode, navigate to the menu item “Options” and select “Troubleshooting.” To gain control of the machine, utilize VNC Viewer and connect to the device.
How to connect Raspberry Pi to laptop using Putty
- Go ahead and download and install Putty. The putty.exe is an Install and can be launched directly.
- Use SSH to connect to the Raspberry Pi, then pick UTF-8 as the type of translation under the “Window” menu item and choose “Translation.”
- When you’ve clicked “Open,” you’re ready to log on. The standard user is called pi.
FAQs ― How to Connect Raspberry Pi to Laptop Using HDMI
Can you use laptop as monitor for Raspberry Pi?
This approach of using your laptop or desktop display and keyboard as the display and keyboard for your Raspberry Pi makes a great little hack. There's no soldering or purchasing extra equipment required: just a network cable is needed.
How do I enable HDMI on Raspberry Pi?
1) Use your Raspberry Pi to become more powerful, then open a terminal window.
2) Use the “sudo nano /boot/config.txt” command to open the Raspberry Pi configuration file for editing.
3) Follow these three lines with arrows to reach the end of the file.
4) Press CTRL+O to save your work.
5) By hitting CTRL+X, exit the editor.
Can I connect Raspberry Pi 4 to laptop with USB?
The Raspberry Pi should be plugged into a USB port to use wifi dongles. Use an Ethernet cable to connect your computer to the Raspberry Pi, and then connect the other end to your router.
Power the Raspberry Pi by plugging the power adapter into its power port, and then plug the power adapter into a wall outlet to turn the power on. Once the electric outlet is connected, the Raspberry Pi will be powered on.
How do I connect my Raspberry Pi to my laptop without Ethernet?
Here's how to use the headless Raspberry Pi with your Windows laptop without an Ethernet cable or monitor now that you've generated an IP address. On your Windows machine, go to Start > Run > Command Prompt and type ssh pi@[IP Address]. Type yes and press enter to confirm the command's results.